| |
Roller Garage Doors - Shire Security
Ltd
Roller Shutter Garage Doors
- Vertical opening roller design maximises drive-through
height while saving space both in the garage and on
the driveway
- Double-walled aluminium construction is exceptionally
strong
- Insulated curtain and unique brush draught seals
protect against cold and noise
- Remote control operation and automatic locking
deliver the ultimate in convenience and security
- Mini transmitter units use state-of-the-art rolling
code technology for added security
- A glazing option is available to allow natural
light into the garage Manufactured to ISO 9002 quality
standards
- Warranty: All SeceuroGlide products are guaranteed
against defect of material or workmanship by Shire
Security Ltd, subject to correct installation and
operation, for a period of 24 months from the date
of purchase
- Choice of 8 stylish colours
Technical Information
Insulated Curtain
Each curtain is assembled from twin-walled aluminium
slats that are insulated with CFC-free foam to reduce
heat loss and sound transmission. Glazed vision slats
are also available.
Maximum Safety
All automatic SeceuroGlide doors are equipped with an
intelligent safety photocell to stop operation if an
obstruction in the path of the door is detected.
Secure Control SeceuroSmart receivers come complete
with an integral courtesy light and two mini transmitters
with high security rolling codes.
- Face Fix Installation
Here the inside edge of the guide rails line up with
the brick opening. However the flush fitting head
plates and flat design of the guide rails make the
size of the door and positioning of the guide rail
less critical. A subframe is not required unless the
structure is very uneven. Moreover, if maximising
the width of the opening is not important, an existing
subframe can be retained with the door installed in
line with the timber opening. If required the guide
rails can overlap into the opening by up to 25mm on
each side.
- Reveal Fix - Installation in the Door Opening
or Between Walls
If the door is manufactured to the exact opening width,
it can be installed within the aperture. This may
also depend on the available headroom above to accommodate
the coil. If the coil is going to be visible from
the outside, an external 90 degree facia will be required.
- Headroom Requirement
The small coil diameter is one of SeceuroGlide’s
strengths. Just 300mm headroom is required inside
the garage for doors up to 2500mm opening height and
350mm for doors up to 3500mm opening height. Where
the available headroom is severely restricted SeceuroGlide
Compact requires just 205mm headroom for doors with
an opening height up to 2300mm. Alternatively SeceuroGlide
Compact can be fitted externally. We strongly recommend
that a minimum 55mm of bottom slat should hang down
into the guide rails when the door is fully raised.
Below this is the “drive through height”.
<
return to product page |
 |
